-
I'm having trouble getting BME280 sensor to work. I don't receive any measurements, it also doesn't seem to be detected by microcontroller.
I've got NAM KIT BME 0.3.3 STD. Firmware: NAMF-2020-44
…
-
### The problem
I have tried multiple different json settings but I can't seem to get my AS3935 lightning sensor to be detected by ESPHome.
On Tasmota firmware it worked fine, Loading a generic 'i…
-
How do you connect the DHT22 to the board?
I see in the photo that it has male headers soldered to it.
Wouldn't it be a beter idea to put the DHT22 directly on the board, next to the SDS011 conne…
-
Hello. I have got a problem with compilation firmware for wemos d1 board, when your module is imported.
At first I have fixed all includes.But still have another errors. Could you please fix this mod…
-
...i have found a bug in your major 2 release of your board d1r1 and d1r2...i would like to suggest a new revision of it....
![UNO STYLE DIR3-VS1053B-R32](https://user-images.githubusercontent.com/45…
-
Just a generic question. I have made an adapter board for the wemos d1 mini. With the adapter it is possible to control central heating with multiple setpoints and to read states from the boiler. I ha…
repa6 updated
4 years ago
-
### The problem
When I start up update a ESPHome device, after approx 10-30sec HA gets unresponsive and is not reachable any more, MQTT shores offline.
I could not figure out the root cause yet
hy…
-
I did try one sensor with the default address (0X20) and it worked. I did try the change address and it worked (0X21). I did try to have two sensors (0X20 + 0X21) and it stopped. Even the I2C scanner …
-
## Hardware
* [ x ] ESP8266
Modelname: WeMos D1 mini or equivalent Clone
Retailer URL: eBay, AliExpres etc.
### Antenna:
* [ x ] circuit board
### Power Stabilization:
* [ x ] 100uF El…
-
where in version 13 is the lines to save capture credentials so that if you turn on or off the board it will load last successful settings. i am using ken taylors code but it has version 11 in it and…