-
```
What steps will reproduce the problem?
1. Connect with python graphical interface, allow IMU to warm up / initialize
2. Yaw IMU ~90 deg
3. Observe ~44 deg heading change on screen
4. Yaw IMU ~90 d…
-
```
What steps will reproduce the problem?
1. Connect with python graphical interface, allow IMU to warm up / initialize
2. Yaw IMU ~90 deg
3. Observe ~44 deg heading change on screen
4. Yaw IMU ~90 d…
-
I have a few queries about the above package summary which you placed in ROS
1) Would you catkinize the package in the future? I am using ROS hydro.
2) Would your code work with this product: https:/…
-
Currently all data from the Nunchuck is done using the Wiimote as a communication bridge and using FreePIE to handle the data received. While this is a workable solution, it still makes the stack some…
-
```
What steps will reproduce the problem?
1. Connect with python graphical interface, allow IMU to warm up / initialize
2. Yaw IMU ~90 deg
3. Observe ~44 deg heading change on screen
4. Yaw IMU ~90 d…
-
```
What steps will reproduce the problem?
1. Connect with python graphical interface, allow IMU to warm up / initialize
2. Yaw IMU ~90 deg
3. Observe ~44 deg heading change on screen
4. Yaw IMU ~90 d…
-
```
What steps will reproduce the problem?
1. Connect with python graphical interface, allow IMU to warm up / initialize
2. Yaw IMU ~90 deg
3. Observe ~44 deg heading change on screen
4. Yaw IMU ~90 d…
-
I am trying to get data from my razor imu m0- 14001 for the past week. I performed multiple calibrations as mentioned in the official hookup guide. When I launch the ros-pub.launch file, i get a ros …
-
```
Hi,
I can stream all 9dofs with a generic serial port terminal, but when I use
the python code, it doesn't work.
With a baud rate of 57600, absolutely nothing happens, so I changed the
baud rate…
-
```
What steps will reproduce the problem?
1. When I rotate the IMI parallel to the ground by 180 degrees the yaw angle
does not change by 180 degres=es
2.
3.
What is the expected output? What do yo…