-
## Current Behavior
In 2.5 you can choose either SBUS output **or** PWM output
## Desired Behavior
Allow both SBUS output on a UART and PWM output from the normal pins.
## Suggested Solution
…
-
First of all thanks for developing a handy lib. I've been using this on a teensy 4 + x8r successfully by installing the package through platformio.
I ran into a bug today and after checking with th…
-
Using an Arduino Mega 2560 with a FrySky R-XSR. I am using the SBUS_example.ino (as a base) on Serial2 (Pin 17 RX) and verified the program starts and the main loop runs but I never get inside the if
…
-
I'm just trying to read the value of the first channel, using the example from the README.
I've double and triple checked my inverter wiring against your example and several others (3.3v). I have …
-
When I plug in my FS-A8S to PC via USB to UART/Arduino nano it appears as COM port, but when I select COM port in app, it says "Connected, Failsafe (Serial Port Read Timeout)" I've tried everything I …
-
Hello again ... during compilation I get an error..SbusRx / SbusTx does not name a type ... why? I would like to ask for an explanation as a child because I am very beginner ... best regards :-)
(I a…
-
Thank you bolderflight for making this library--been very useful.
I am using a RadioLink R7FG to control an RC car through the Arduino Mega (hope to move to Micro later). However, when attempting t…
-
I recently (rather late!) downloaded the most recent RF24 library and updated my radio control project. The transmitter worked perfectly and immediately without any code changes. But when I updated th…
-
**Moved this a new issue so others can find it**
Although not quite as smooth as i would have hoped. get a slight jitter if panning at a certain speed any advice on how to get a silky smooth moveme…
-
A very simple test program seems to 'deadlock' [for lack of better understanding yet] mt Teensy 3.2. The Arduino Serial Monitor does reports a couple of lines (around eight) and then does not report n…
mw46d updated
3 years ago