-
Hi,
I've got a system using a PureThermal-M running on a bananapi M2 Zero which works fairly well after a bit of playing around. I am running it from a C program based on the grab example using the …
-
Hi,
I've been using the DIY camera for several months with a Lepton 2.5 sensor. I recently purchased a Lepton 3.5 sensor I want to use with the camera. However, when I put in the Lepton 3.5 sensor,…
-
Hello! I want to use jetson TX2 and lepton 3. I follow https://devtalk.nvidia.com/default/topic/1024806/jetson-tx2/how-to-enable-spi-spidev-on-28-1-on-target-/ and set the maximum speed as http://me.k…
-
Hi!
Is it possible to control the FFC (shutter) with this framework?
Cheers,
Jens
-
I am using a FLIR Lepton Camera and a raspberry pi3 to generate heat maps.
In the beginning, the camera gives me the correct output, however, after some time, it gives me following kind of images:
!…
-
I am trying to lock the scale/heat range of the camera so that it doesn't adjust based on the scene it is taking a photo of.
For example, when my hand is in the frame, the resulting image that the…
-
I have a PureThermal 2 with Lepton 3.5. Windows 10 VLC play the video stream, on Ubuntu 18.04 VLC can't play, the log show "v4l2 stream error: cannot open device '/dev/video0': Operation not permitted…
-
I have a setup where I require 4 thermal cameras. But all of these cameras have same serial number. May I know the changes to be made in the firmaware code in order to get unique serial number for eac…
-
I have Lepton 3.5 + PT1 Board and want to work in Windows.
Have anybody a SW for windows?
Thanks for help
-
We've occasionally see failures where leptond is unable to talk to the camera. leptond gets stuck during CCI initialisation until the systemd application watchdog kicks in, kills leptond and then it's…