-
-
Implement a curve showing maximum hp converted to every speed by different gearing.
In other words infinite gears.
This curve should be overlap the gearing curve to show what is possible by changi…
-
**Note from the teaching team:** This bug was reported during the _Part II (Evaluating Documents)_ stage of the PE. **You may reject this bug if it is not related to the quality of documentation.**
In…
-
An ideal VCA component with a gain/voltage parameter would be useful for designing compressors, gates etc. These are typically current in / current out devices where the current relation is Iout/Iin =…
-
A good feature if you could set the value for the ideal range for your pool. If you have a salt pool, some values are different compare to a normal pool. Or you just want to have a slightly different …
-
**Describe the bug**
Let K be a number field (e.g. a cyclotomic field)
1. Primary decomposition does not terminate after 12 hours for a principal ideal (f) < K[x,y,t]
(but `factor(f)` terminates …
-
In your ug, the payroll section comes before schedule which is confusing as a user because prior to reading the payroll commands section, there is no mention of shifts or start dates or end dates for …
-
In PrusSlicer there is a display in which you can see the perfect wall thickness depending on the selected settings. This helps you to optimize your self-designed models for 3D printing. It would be g…
-
In the process of unpiet, the Wayland backend needs some work under the hood as well. Since the backend is relatively immature, I'd recommend a rewrite of the Wayland backend while we are in progress …
-
As per comments in the notebook in my runpod instance, it says I need 500 steps for 10 images (50 steps per image):
So with 7 images, I end up with 350 steps and it barely works.
![image](https://…