-
Hi :)
I'm developing a Raspberry Pi Node.js quadcopter.
Will the pi-blaster and it's Node.js binding allow me to produce 4 different, maximally accurate, hardware PWM signals at the same time, over …
-
I am able fly quadcopter with RC but when I run dronekit script -> set_altitude_target.py the motors turns in steps slowly. Few days back it worked by due to too much thrust it crashed to ceiling. I a…
-
We need to log the data from the USART. The data need to be collected for analysis of the sensors, motors and the quadcopter. The data should be readable. Something like output the data to STDOUT will…
-
While connecting the mission planner to an antenna tracker (which was in turn connected to a quadcopter), the vehicle selection drop-down only showed the tracker. See pic below which shows both vehic…
-
## Feature request
**Is your feature request related to a problem? Please describe.**
I want to simulate a mixed fleet of vehicle types in Gazebo, but it's not clear how to do that.
**Describ…
-
I have a quadcopter that produces progressive JPG files. These aren't displayed sensibly in mpv-image-viewer. It appears that the image is loaded again and again, with the progressive loading produc…
-
I have ships (quadcopters) that are both 3S, 4S, sometimes with a variety of props on a given day.
I'd like to be able to autotune the powertrains individually and store them in banks as well as have…
fujin updated
6 years ago
-
Hi, I have been given a receiver from a 'flying Fy-X8' quadcopter. The quadcopter looks like this one:
https://www.google.com/search?q=flying+fy-x8&tbm=isch&ved=2ahUKEwjansnqgePyAhUMlBoKHZogBp0Q2-c…
-
Hi,
I started my first flights with 2.1 RC1 and active braking.
My quadcopter:
Matek F7; 10" props; AUW 1,1 Kg; EMAX 3505 650kv.
I used the default settings in your initial post.
My impression …
-
```
Integrate a barometric altitude sensor to allow for much tighter altitude
control. This will be
especially useful for:
- automated landings
- hovering helicopters and quadcopters
- vertical …