-
I'm testing the simplifying function on Colab with installation code:
`pip install meshlabxm`
The whole code is like this:
```
import os
import sys
import inspect
import meshlabxml as mlx
…
-
Hi, I use OpenMVS on ubuntu16.04 to create textured mesh. The original result is rather good, but I find that if I downsample the mesh using OpenMVS or other algorithm, some area may become very blurr…
-
-
Two points to consider when adding a CIC mode to pyfda:
1. When designing a moving average filter which averages over 10 samples, then the number of delays is obviously only 9 since I can use the l…
-
Here is an example with same export configs (limiting the mesh to 50 000 polygons). On top is the expected result, on bottom is the buggy result (some surfaces are missing and some vertexes are linked…
-
Hi,
I am starting to try rtabmap_ros and plan to make some development based on that. After some tests, The results looked fine for images from realsense sdk2 or realsense2_ros node, but I didn't e…
-
Add ability to persist most recent (within decimation amount) value of certain critical tags.
Proposed approach:
Use [SQLite library](vipm://drjdpowell_lib_sqlite_labview?repo_url=http://ftp.ni.co…
-
Initially should work in the datum dimensions; but eventually user should be able to choose which dimensions are being decimated. Also, consider implementing the general decimation algorithm (currentl…
-
Thanks for these wonderful tools. I've been experimenting with your LFP pre-processing on my own data, and found a couple things that might be useful to you. Here is my understanding of your process:
…
-
Hi,
My system is ubuntu 20.04 and gnuradio3.9.
Im trying to run the program and get the followig output,
michael@ubuntu:~/Desktop/gr-iridium-maint-3.9$ sudo iridium-extractor -D 4 examples/rtl-sd…