-
**Actual Behaviour**
I have noticed a difference in the crown fraction burned calculation between FBP Go and the Red Book and Red App. Here’s an example using an FFMC of 95, a wind speed of 10, and B…
-
I'm designing a 3072-channel data acquisition system for X-ray diagnostics of thermonuclear reactors (ITER and similar).
The DAQ will acquire signals from Gas Electron Multiplier.
We plan to use Zyn…
-
When I batch add 200 network objects, it takes almost 10 minutes!That's not acceptable
-
Hello @Qantas94Heavy, I was normally cruising and I accidentally disengaged my altitude autopilot which I re-engaged and then..... it pulled up violently. The vertical speed did not work and even if I…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### This issue exists in the latest npm version
- [X] I am using the latest npm
### Current Behavior
```
FROM n…
-
Do you think you could make a button/alarm? It would look like this:
![image](https://cloud.githubusercontent.com/assets/12616126/10334826/b6ccdc6c-6ce4-11e5-90fc-b09488641d83.png)
The lights are squa…
-
Currently, we have successfully built VCU118 FPGA with PCIe RC mode (fmc_xdma). Now we are switching to PCIe Endpoint mode (edge_xdma), however with no success. What is the best way to build VCU118 wi…
-
At slots 7 & 8 (8 slot backplane) IC39 keeps RST active. Currently I have to "reset" power source to get the board to work.
-
I believe the print of iterations shows wrong results or that the solver does not handle this problem. Objective should end at 306.5
http://www.stfmc.de/fmc/rhs/x/wschfh.shtml?ampl/tp015.mod
or
…
-
When pressing a key on the FMC the server response with "unrecognized message" and nothing happens. The display correctly shows the information but no inputs can be given.
![image](https://user-ima…