-
svn 18763 作業中
```
Index: userGuide.t2t
===================================================================
--- userGuide.t2t (revision 58017)
+++ userGuide.t2t (working copy)
@@ -69,9 +69,7 @@…
-
Hello, I am having an issue with adding my second extruder motor, I recently put dual heads on my printer and am trying to get everything set up. I am using arduino ide 1.8.5 and marlin 1.1. The x, …
-
### Bug Description
Nozzle to probe offset is ignored. Probably on X and Y axis.
### Configuration Files
Not relevant
### Steps to Reproduce
Compile latest 04c4c6004e752582235357b14aebd…
-
I installed BLtouch on my homemade printer with Marlin 1.1.9 recently and it doesn't compensate the bed leveling. Before I installed BLtouch, the bed limit switch for Z axis seems to work perfectly wi…
-
### I need help on my 3d Printer, the bed size is 400,400 but i only try to use 330 by 300 but when i do the bilinear auto bed leveling it would say probing failed at the 7th probe, i tried reduci…
-
Hello
I am trying to update to the last version, i have tried with both versions 1.1.9 and 2.0, and my probe does not stop at homing.
Z_min is below bed level and I use the z_probe as Z_homing.
…
-
You guys are always so helpful and have taught me so much already, but I keep discovering new issues with my firmware. After updating my firmware to the latest 2.0.4.3 bilinear autolevel fails at the …
-
If you set up some task this way:
before 'deploy', 'some_task',
And in some_task you simply read the "latest_release" variable (in a puts line for instance), then:
Current results:
a) If it's the …
-
Hej Guys.
I have compiled the 1.1.9 marlin to my corexy printer, and i have the probe sat at 30mm(-30) to the left of the nozzle. My bed size is x175 y165 (z242)mm when i do the G28 and G29 with th…
-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…