-
### Version
2.3.57.9
### Operating system type + version
Windows 11
### Behavior
The ability to control the fan speed during ironing.
Currently there is no option to set the fan speed du…
-
> ./Dell_iDRAC_fan_controller.sh: line 94: [: -gt: unary operator expected
> ------- Temperatures -------
> Date & time Inlet CPU 1 CPU 2 Exhaust Active fan…
-
Wanted to say thank you for this Board. It is everything I expected, (although a touch difficult to figure out.)
The USB port does have power, and the fan has an ON/OFF toggle switch in the c…
-
### The problem
Hello Community I have a problem,
I would like to make my MAICO ventilation system Smart.
Maico with 2x ebmpapst G3G16m fan
The original circuit board should be completely …
-
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
Let Say I put infill 5% then suddenly …
-
I use the Edge version and the connection to my Hoymiles HYT + battery works well. Thank You.
Is it possible to integrate the temperature values of the inverter + fan speed? I would like to build a…
-
UPDATE: Best i could do based on code limitations is [below](https://github.com/merbanan/rtl_433/issues/3033#issuecomment-2292298947)
I have decoded and figured out the remote codes.
[bitbench](h…
-
Hello together,
I know the mainboard is ancient, but I still use it. The control of the System Fan works without problems, only the CPU Fan can't be assigned and even if you do this manually, the s…
-
So I just updated L-connect to v2.0.8 because i was trying to see if i could fix some rgb related things. But after doing this it seems that fan control is not taking control of the fans anymore. I us…
-
I dont know if the fan is working the same was as Förnuftig that use frequency changing and feed back for controlling the fan speed.
Is the Uppatvid doing the same or is it using Puls Wide Modulatio…