-
@goatchurchprime has freed up a spare PC in sorting out the Arcitype mill (although he's going to double-check it is available for us to reuse, and that there's nothing important on the hard disk befo…
-
Using 24 finger joins along a 191mm side misses the finger at the end.
In this configuration, 25 fingers works, but 20 to 24 fingers result in a big gap at the end where there should be a finger.
I …
-
I have installed Inkscape 0,91 on windows 10 server
I put your files sunder extension folder
But after restarting application, i don't find your extension in menu : Extensions -> Render
-
Create a simple file using the laser cutter software, to allow new materials to be tested with a range of cutting parameters.
It should burn a test pattern including lines at a number of power settin…
-
We should do this very soon, as #1 requires us to know the thickness of the metal. What thickness do we want?
-
1 each of
`Volty/drawings/module.svg`
`Triggy/drawings/module.svg`
and with engraving -
`drawings/blank4hp.svg`
`drawings/blank6hp.svg`
check that engraving comes through right and note optimal sett…
-
pre lasercut
adv0r updated
8 years ago
-
While we're at it, some small holes in the back to attach chicken wire to would be handy
And maybe reduce the guard height to 2 or 3 inches
-
Austin is looking for a kit that will be a simple enough project for those new to NodeBots to work through.
It looks like we're looking for something mobile. We can handle some basic 3D printing if n…
-
We don't have a spare focusing tool for the large laser-cutter. Before it goes missing we should at least measure what size it is, and ideally design a replacement.