-
I apologize if this issue would be better addressed in a different forum, but I trust the expertise of those here. I've tried many different options but I'm getting a pendulum type swing the slowly co…
-
Hi,
I am using a Raspberry Pi 3 with a Navio2 and I want to store data from GPS and IMU at 5 Hz.
I've got an example code [GPS_AGM.py](https://gist.github.com/gmsanchez/1145c42ae6a20d2867bec42ca…
-
The GPS of my new first assembled quadcopter works fine: altitude, latitude and longitude are correct. The GPS I'm using is the Ublox neo-m8n from Banggood with the omnibus f4 pro v2. In poshold tha q…
-
I'm using the "Crius AIO Racer F3 with integrated OSD" which you can find on places like https://www.aliexpress.com/item/CRIU...737854451.html runs extremly well on Betaflight and Cleanflight (except …
-
This is what i am using
GPS:https://hobbyking.com/en_us/mini-ublox-neo-m8n-gps-for-apm-and-pixhawk.html
Omnibus f4:https://www.banggood.com/BF3_1_5-Omnibus-F4-V2-Flight-Controller-STM32-F405-MCU-Int…
-
I have the Omnibus F4 V3. Holybro Ublox NEO-M8N GPS Module with HMC5883L digital compass. the Holybro does turn green and start to flash the blue led(?) after start time on the unit. When i enable the…
-
Firstly thankyou very much for this excellent library, it has proved incredibly useful for my latest project. This is more of a question than an issue as I don't think my problem is directly related t…
-
i have a omnibus f3 with https://www.banggood.com/UBLOX-NEO-M8N-BN-880-Flight-Control-GPS-Module-Dual-Module-Compass-p-971082.html?rmmds=myorder
this gps...
anyway im using inav.. new version w…
-
@LorenzMeier, @tridge, @julianoes
I was having a problem understanding the data coming from my magnetometer on my GPS. It wasn't making sense to me, so I had to dig into the driver and found some na…
-
Can't get the magnetometer to be recognized on omnibus f4 v3. Frsky sbus on uart 6 (sbus, 5v,gnd) and gps on uart 1 are working. Mag to scl and sda will not for me. Any ideas