-
If the GPIO use for SWCLK or SWDIO is reconfigured (MUX GPIO) just after boot on the target, edbg does not success to erase/flash/read the target
It is a timing problem
I inverted some commands …
biboc updated
4 years ago
-
## Description of the problem or question
Is the new Arduino Nano Every supposed to be compatible with the library?
The documentation tells this:
> The USB interface is managed by a dedicat…
-
I recently started adding support for ATSAMD51P19A. While I was doing this I ran `update.sh` and noticed that at least one other ATSAMD51 doesn't actually build at head. I started digging in to this a…
-
Hi,
I am running IR quantification and the output file has no reads (IRFinder version 1.2.3.).
I built the reference with the last version of the human genome GRCh38.p10, and the GTF version 27.…
-
I am not sure why I get NaN for the TSS.enrichment?
```dim(atac)```
```114010 44420```
```
# to save time use the first 2000 TSSs
atac
-
It seems Annovar uses the previous Gene.refGene to annotate a variant of the next gene. For example, NM_152486 is for SAMD11 but in the third line it is still in the Gene.refGene field where NM_015658…
-
I've been playing with the [ATSAMD11C14A](https://www.microchip.com/wwwproducts/en/ATSAMD11C14) and decided to take a swing at adding HAL support for this device.
https://github.com/jessebraham/ats…
-
On a Nano Every, if you try and transfer more than about 128 characters from the Serial Monitor to the board via the serial interface it locks up, and the only solution is to unplug the USB cable.
…
-
Hello again.
We start testing `annotsv` and found some inconsistency - column names and content is mixed. Ar far as I can see content is same, it is just mixed.
Runs were same but on different machi…
-
Error parsing MAF file
1. MutaGen requires Codon_Change or Codons fields in MAF files
2. Could not find HGVSp_Short or Protein_Change fields in MAF file
**Reproduce:**
```
$ mutagene rank -i …
neksa updated
5 years ago