-
The other thing I was thinking about on the long drive to multigp.... Did we have a way to know if the rx misses a packet? For example, the sbus packets come in every 9ms. If the rx misses a packet …
-
Similar to https://github.com/offensive-security/kali-nethunter/issues/298, i cant get my TP to work on my N9 running 5.1.1 build LMY47K.
By doing some googlefu i was able to find i should just be ab…
-
#### Issue details
After selecting Option 10 for Serialx - and going to the radio to discover the available sensors, the sensors repeat themselves and quickly fill all the Taranis slots
#### Version
…
lvale updated
6 years ago
-
I'm using FrSky receivers just to retransmit RC signal to my tracker. RC data is transmitted using SBUS but my tracker transmit back telemetry using SPORT - information from done like battery, GPS, et…
-
Hello evrybody,
Many new FC boards does not have 8 motor output pins.
So I'm searching sonar with I2C output.
And I'm found this one: [http://bit.ly/2ACnhzw]
But this module designed for PIXHAWK o…
-
Can we help somehow with the SBUS support?
My idea is "use an arduino to convert/invert the SBUS protocol to standard TTL". SoftwareSerial can do that for us ;) Something like that:
``` c
#incl…
-
Hi there,
When I try to set the midpoints in the Configurator, I can only set one value - then a restart is necessary.
It doesn't matter if this is done in "live mode" or normally and saved.
On…
-
With the latest firmware verisons, I have a problem, I use a futaba receiver, but when checking the channel entries with the $ i command, it only detects channels 1,2,3, 5, but for channels 5,6, 7,8 a…
-
@mikeller
I haven't yet figured out the exact cause/fix, but `rxUpdateCheck()` in rx/rx.c is not properly handling rx frame rates that exceed the `TASK_RX` desired period of 50Hz (20ms).
So tak…
-
Pertinent info:
Board: Omnibus F4 V3
Betaflight 3.1.6
ESC comm: DSHOT 600
FRsky SBUS receiver --- XM+
Taranis X9D
I've been trying to get this quad tuned and flying for the past month or so, …