-
We are in the process of getting the issues list down to 0, or as close we can.
For this we need a lot of people, with as much different machine setups as we can, that are willing to load the latest …
-
The encoder is working great. I have tested the spindel speed with a seperate tester and it matches the software settings.
However
the gear ratio from the servo motor to the feed screw is 1 on the …
-
### Describe the problem
I installed RC7 on new machine (RPI4 running Ubuntu 22.04). But pretty sure other setups would work the same.
I then installed the Teensy boards, which installs it's own S…
KurtE updated
2 years ago
-
Hi, thanks for your app. It’s really cool. I’ve buwizz 3.0 and basicly programming skill (I works as web developer). I can help for add buwizz 3.0 support, but don’t know what need do for it. I can be…
-
# Bug Report
## One-Line Summary
`artiq_sinara_tester` reports "KeyError: 'dds0_device'" when testing a system with SU-Servo.
## Issue Details
### Steps to Reproduce
1. Generate a `devi…
-
Many thanks for providing this Attiny core!
I'm experiencing an issue with this very simple code:
```
int unsigned long pwm = 0;
void setup() {
pinMode(3, INPUT);
pinMode(0, OUTPUT);
}
…
-
# Bug Report
## One-Line Summary
The SU-Servo gateware sends data to profile 0, while profile 7 is enabled by default on the CPLD.
## Issue Details
It is caused by not updating the gatewar…
-
**Submitting author:** @Ajstros (Abraham Stroschein)
**Repository:** https://github.com/Ajstros/pyripherals
**Branch with paper.md** (empty if default branch):
**Version:** v0.0.3
**Editor:** @daniel…
-
## Current Behavior
Just watched Darren's latest vid and it brought this "old issue" to my mind again. Something i never understood (but maybe i'm missing some info's here) is why is Acro default wit…
-
If autoleveling is activated X and Y steppers cannot be disabled. If X and Y servos are configured to be disabled when not used, autoleveling will not work.
What happens is that when disabling the X …