-
```
Hi,
I can stream all 9dofs with a generic serial port terminal, but when I use
the python code, it doesn't work.
With a baud rate of 57600, absolutely nothing happens, so I changed the
baud rate…
-
```
Hi,
I can stream all 9dofs with a generic serial port terminal, but when I use
the python code, it doesn't work.
With a baud rate of 57600, absolutely nothing happens, so I changed the
baud rate…
-
```
Hi,
I can stream all 9dofs with a generic serial port terminal, but when I use
the python code, it doesn't work.
With a baud rate of 57600, absolutely nothing happens, so I changed the
baud rate…
-
```
Hi,
I can stream all 9dofs with a generic serial port terminal, but when I use
the python code, it doesn't work.
With a baud rate of 57600, absolutely nothing happens, so I changed the
baud rate…
-
In your example Im having some odd values with the software Yaw, if it reads 90 and I move it to 180 it will count back down to 90 again..So no matter where I rotate the sensor it resets to what ever…
-
```
I updated the firmware, so that I could get the IMU to work with an xbee.
Well...it worked before the update. It would initialize, give me the menu, and
the data made sense.
Now it does this: …
-
```
I updated the firmware, so that I could get the IMU to work with an xbee.
Well...it worked before the update. It would initialize, give me the menu, and
the data made sense.
Now it does this: …
-
### Hey,buddies,I encountered this issue while using LIO-SAM。Firstly,I run the launch file,then play the bag files which are provided by official website(like west.bag/casual_walk.bag) and reported…
-
```
I updated the firmware, so that I could get the IMU to work with an xbee.
Well...it worked before the update. It would initialize, give me the menu, and
the data made sense.
Now it does this: …
-
I need to get all sensor values (Gyro, Accelerometer, Magnetometer, Euler, and Quaternion) at the highest update rate possible (100Hz). But, everytime I called the updateGyro(), updateAccel() and so o…