-
Hi, I tried building drawbot from the tutorial. Unfortunately motors only vibrate. I rechecked hardware (swapped CNC shield, couple of arduinos, drivers, motors). Apparently, the problem is software b…
-
Package: control
Currently the arduinos are assigned COM ports based on which one is plugged in first. This will be somewhat cumbersome and error prone if we unplug the motor controllers and so we s…
-
```
Hi there, I'm new to Arduino and Xbee and I'm having a lot of trouble trying to
get my system up and running.
Equipment: 4xXbee S2, 4xArduino Due (seial1 as Arduino-computer comms, serial3
as …
-
```
Hi there, I'm new to Arduino and Xbee and I'm having a lot of trouble trying to
get my system up and running.
Equipment: 4xXbee S2, 4xArduino Due (seial1 as Arduino-computer comms, serial3
as …
-
First of all, thanks for this library. I used it to get a number of boards talking to one another including the Adafruit 32u4, HELTEC esp32 based boards and even an STM32LRWAN1. They all work great.
…
-
Check_network has been modified from original 2.1.7 code . Since ESP32 do not have a ping function like Arduinos and ESP8266 the code need to be rewritten.
Could you tell me the reason for your chang…
-
Nice work on this lib, thanks for sharing.
In Arduinos such Uno, etc.. an `int` is 8 bits. Life is great.
Now using a non 8 bit arch such as an ESP32, it starts getting messy.
I think that swit…
-
Testing our two arduinos trying to add arduino-vga to run the appleii stuff.
In both instances we lost port recognition on our macs running osx 11.6 and 11.8 respectively.
Wondering if this problem …
-
It took a bit of reading and praying, but nothing in this codebase actually requires the custom circuit boards or firmware. It runs just fine on Arduinos with matching processors (ATMega 328). Tested …
-
Thank you for all your work on eChook - it is a really helpful platform.
We have had an issue twice now where the arduino has got fried - it stops responding, draws a load of power and gets burning…