-
We should check for firmware integrity before starting it. A CRC value could be stored in the Flash area.
-
I was wondering How can we get the firmware binary file and what model can this algo applied to? Thanks
-
There is a problem with the firmware in Bookworm for the wifi-chip on Zero2w. It is a known problem for many users, and it has been discussed in the raspberry pi forum: https://forums.raspberrypi.com/…
-
Using fwupd-efi for firmware upgrade by copying fwupdx64.efi and capsule files ( system fw capsule and ux-capsule ) to ESP.
Upgrade happens successfully if display monitor is connected to the devic…
-
Hello once more,
`uname -a`:
`Linux jayofelony 6.6.31+rpt-rpi-v6 #1 Raspbian 1:6.6.31-1+rpt1 (2024-05-29) armv6l GNU/Linux`
I ran into this issue after which the monitor mode quits, this is a c…
-
|---------------------------------|------------------------------------------- |
| Camera Model | {D400 } |
| Firmware…
-
I have tried to port spi+NG solution to my board. I use 1.0.3 version,but it does not work.
host side log:
root@myd-y6ull14x14:~# insmod esp32_spi.ko resetpin=44 raw_tp_mode=1
[ 62.261172] esp32…
-
I was able to properly flash the MCU with the latest passthrough firmware. This is my ESPHome config: https://pastebin.com/p22yFTiz
I can capture the original remote successfully, I think:
[13:34:…
-
The cold-boot-hart lottery in `fw_base.S` has recently been modified by using the __boot_status_ variable instead of the __relocate_lottery_ variable. This introduces a data race since the __boot_stat…
-
I've noticed some issues with the LED bar:
The pictures might not be very clear, but you can see green lights on the first and last LED lights, and in the middle, they are all yellow.
Maybe all LEDs…