-
It would be nice if the core temperature could be used as an input, or really for that matter the output of any shell script/command. At the very least it would be convenient to have this information …
-
Hi,
I use your app quite some time now and miss the control functions.
Can you also provide a connection with the teslafi.com API for controleling the car?
I think there are more Teslafi users …
-
Using indigo sky on a Raspberry Pi is very nice, but it would be even nicer to use it on an all-in-one device like the [AstroLink 4 Pi](https://shop.astrojolo.com/product/astrolink-4-pi/). This is bas…
-
See protolathes, (which are not currently offset but should be, this is VV'd). Printing objects doesn't put it where the protolathe is.
This is particularly a problem because, well, it looks bad.…
-
Hi guys,
I recently added some conditional gcode to my start gcode, and it is breaking cura's ability to populate these temp variables.
Here is my complete start gcode block:
```
;///////…
CCS86 updated
4 years ago
-
Add support for Adventurer 3 Pro 2
-
The current state of the repo (commit 82c5bbeabd6e6594d2cbb3c68f4fab4b7749a124) does not show a response when the seat heater buttons are tapped, and the middle dials do not reflect change in the left…
-
In SS / PS with my Duet3D powered printer, I use conditional gcode to look at the current bed temp and decide whether it is cold and needs a longer heat soak, or if it is already hot and can start a p…
CCS86 updated
6 months ago
-
Can you please tell me how the pins of ESP32 are mapped to driver outputs, heaters and fans i.e in schematic I can see them connected through STC15W408AS controller which is communicating with esp32 u…
-
Related to discussion on G+ some time ago:
https://plus.google.com/105486978634901788220/posts/R7nkDC4WAQP
I've noticed a resonance with some heater wire that results in a buzz when the board is u…