-
I am using Candle 1.1.7 on a Win10 64bit PC. Milling etc. works, but I am not able to modify the height map at all. The "Heightmap Settings" area in the Candle window is all greyed out, showing the de…
-
When cutting out a rectangle pocket, JSCut generates the following toolpath:
![screenshot from 2014-12-28 14 17 39](https://cloud.githubusercontent.com/assets/194491/5563903/66f3a300-8e9c-11e4-93cd-0…
-
I am brand new to all of this. Linux Github milling. So please excuse me if this is the wrong place to register a problem
Having installed and tested up to getting the machine to respond in the corr…
-
Currently the dirt skirt sometimes tends to come loose in the middle of the milling job. Which is quite problematic since we have the safety system in place and therefore cannot open the door or windo…
-
Add new spindle configurations to sinumerik program generator
-
I would have use for a post-process UV cure similar to the milling post-processing option. This for using UV curable resins extruded via a syringe which beyond my specific interest is highly applicabl…
-
Hi,
I realy love grblHAL and this sender. One thing I am regularly missing is the possibility to start, restart or resume a milling job from a certain point in the code. This would be very helpful …
-
add support for "long" mounting holes for more tolerant Eurorack mounting
from this ModWiggler post by `abschall`: https://www.modwiggler.com/forum/viewtopic.php?p=3573713#p3573713
> It's a modi…
-
It might be helpful to mention either when you first introduce FlatCam or in the FlatCam tutorial that since FlatCam is always in beta, it often crashes and could require the user to restart their com…
-
I had some unexpected behaviour during small circular movements. It can be 100% reproduced with the following g-code (200 steps/mm for both X and Y) :
G1 X10.000 Y20.000
G2 X11.203 Y19.927 I0.000 J…