-
Hi, I have a 2017 Grandee NXT that I tried to connect to via the peripheral port and it did not work. Seemingly caused the board to crash/reboot as I could hear the power relay clicking on/off for the…
-
Hi,
I have just tested my pi5 with my 12v battery that I use outdoors and a 12v 5v 5A converter.
https://fr.aliexpress.com/item/1005002405495827.html?spm=a2g0o.order_list.order_list_main.15.540c…
sc74 updated
3 months ago
-
hi! thank you for watching.
there +12V and -12V port in the pcb of mainboard. The orientation of the socket installation on your blueprint and the finished photo is reversed。
I installed the socket …
-
- [x] Add LM7480-Q1 to the Altium component library.
- [x] Calculate inrush current through fets for ~1500uF capacitive load, and add inrush limiting circuit if needed.
- [x] Calculate max power dis…
-
I have been trying to use this program with this card:
https://mikroelectron.com/Product/Modbus-RTU-4ch-Relay-12v-RS485-Module-4-Input-Optocoupler-Isolation/
but it does not work. What could I be d…
-
### Variant
_No response_
### Control type
_No response_
### Control mode
_No response_
### Description
I don't have the 36V Li Ion batteries but do have the mainboard and motors/wheels. Is it …
-
The 12v ws2811 LEDs don't work well and keeps flickering even with a logic volt shifter from 3.3 to 5v
-
Hi @KerJoe, I am taking your code as reference to create my custom firmware on a pcb800099 board, everything works except the pin named ACC on pcb800099 board.Basicly when 12v aplied to this pin board…
-
-
Is it safe to have 12v power and connect the board to USB?
I understand the power selection pin draws power from either 12v or USB but what about when you have both?
I am experiencing issues wit…