-
hello i use the nucleo 64 from STM with the micro STM32F103RB
SO if i do a simple program the blink led, it work.
but when i try program to use the TFT i have a error
and the error apear when …
-
I'm using Adafruit IO switches to turn my nodeMCU lights ON and OFF. The following code works but for a limited period of time. 5 minutes after the connection into Adafruit IO it seems the client trie…
-
Problem: Alternate component I2C addresses are not recognized in IO when attempting to add a new component.
Background: I'm using the Feather ESP 32 V2 on Adafruit IO with two ADT7410 temperature s…
-
This keeps rearing its ugly head but I've never seen someone follow up with the solution. Please give a helping hand after reading this summary. It contains specific facts pertaining and hopefully suf…
-
Hi.
I’m experiencing an annoying distortion on the Matrix LED displays. It’s like random horizontal lines (or points) appearing & disappearing. Always at the right side of any LEDs being on. It’s lik…
-
I have no problems interacting with the LTE Demo (get GPS location, send and receive messages) but I’m having problems with the ioT Example. I can’t send data to IO Adafruit.
My main aim is to make …
-
Hi,
I'm a happy user from reefpi for now a few years :)
Something that has always been in my setup is that I only see 2 telemetry in adafruit online:
- 'rpph-ph-meting'
- 'rpsystem-load5'.
…
-
-
This is essentially the same issue as #256 which was, IMHO, closed early because the author had posted a different test that generated a different response code.
When connecting to Adafruit's IO s…
-
Hi Todd. I didn't realize this library was a CLI until jwcooper pointed it out [here](https://forums.adafruit.com/viewtopic.php?f=56&t=86025&p=433261#p433261). I had been building [my own CLI](https:…