-
## Specifications for new sensor / switch / or other device ...
https://shop.ecowitt.com/products/ws68
https://osswww.ecowitt.net/uploads/20220803/WS68%20Manual.pdf
Für diesen Windmesser gi…
-
**Describe the bug**
I recently found out that my resource pack for Weather2 on 1.20.1 has missing textures for the block entities I remodeled.
If I remove the `"texture": "blocks/te/anemometer.pn…
-
Connect the anemometer to a Atmega328p and get data from it
- [x] Research
- [x] Communicate with the device using UART. (not getting any response)
- [x] Documentation
-
erget updated
9 years ago
-
I've been around this sensor for a few years, and finally got around to working out what I think the bits are.
However, I'm not quite confident enough to write a proper decoder.
It's a battery+sol…
-
The Meteorological Mast (Met-Mast) has anemometers at three heights:
- 2x anemometers at 110m
- 1x anemometer at 67m, on a side boom
- 1x anemometer at 25m, on a side boom.
For anemometers on …
-
Hi there,
Looking to see if a new icon can be added. The purpose is for Personal Weather Stations (or PWS). The icon idea could be a wind vane and anemometer.
Photos:
- http://icons.wxug.com/i/mic…
-
Date: 4/8/15
By: Andy Pham
1) Figure out the microphone analog output mean using teensy
2) Change the mean 508 into the new mean of 1)
3) Using alpha = 0.0001 instead alpha = 0.0002
3) Using sqrt(out…
-
I encountered the following issue when running ros2 launch test_env main_simbot_launch.py:
ros2 launch test_env main_simbot_launch.py
[INFO] [launch]: All log files can be found below /home/gouqin/…
8ijuu updated
5 months ago
-
The wind speed (and direction) observed by sonic anemometers vs. cup-and-vane anemometers can be quite different, especially in some weather conditions (e.g., low wind speeds). We need to be able to …