-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
I'm looking at using my Arduino as a proxy between a PS4 and a PS4 controller.
To do this I need to forward the authentication process between the 2 devices as described here:
https://forum.gimx.f…
-
After loading either Arduino example to my board, I do not get a notification message with the link to the landing-page. The rest of WebUSB seems to work, because I can use the console example to send…
-
#### Description
While running tests/trickle for #8904 on mega-xplained, I have run into a number of different issues. One issue is that prev_now is not being initialized properly in main (it assumes…
-
I noticed at the bottom left of the tool bar arduino-create-agent--> open debug console in chrome, it has a textbox and a send button. If you enter
```
list
```
It gives a list of connected d…
-
_Adding this issue here for tracking specific configuration issues from users._
Thank you for taking the time to help us figure out what's going on.
To help us out with narrowing down what's goi…
-
**Describe the bug**
I Seem to be unable to get the basic example sketch for the rotary encoder to work for a NodeMCU-32S esp32, it just returns an error saying "Error compiling for board NodeMCU-32S…
-
Hi,
Hoping to get some advice on setting-up ConfigurableFirmata on an Arduino Nano with an AT328PB.
Added a condition to lump the AT328PB in with nano group during board.h configuration:
``
…
-
### Current behavior
When no cores are installed, I would expect that `listall` returned all the _existing_ boards (like the Boards menu in the IDE). For a new user it's not clear that it only list…
-
Hi guys!
When compiling for a digispark, I get a lot of warning noise. I do not know how important this is but it makes me at least nervous every time I compile my code :-)
It boils down to
- …