-
To use a toolboard (ebb36) I couldn't query can0.
The following status messages are displayed by the system:
![image](https://github.com/makerbase-mks/MKS-SKIPR/assets/132276283/8cfc4907-423f-4689-a…
DK4YA updated
3 weeks ago
-
Hej,
Som jag förstår så är det inte canbus adresser i yaml filerna er ut att vara förkorta, vet du/kan du vilka vilka de äkta canbus adresserna är, jobbar med ett eget program till en annan canbus ad…
-
Hello,
I'm using ATMO LITE+ATOM CANBUS,flash m5stack-atom-20240428-all.bin,and change usb mode to actisense, but using the nmea reader software the log shows the get operating mode timeout, I won…
-
In ros1 we used to use the [socketcan bridge](https://github.com/ros-industrial/ros_canopen/tree/melodic-devel/socketcan_bridge) to convert the canbusses to `can_msgs/Frame` ros messages. All messages…
-
How can I activate and use the CANBUS, otherwise the MKS Skipr is not usable for me?
-
The kernel seems to be compiled without support for CANbus. Haven't been able to use a usb-CAN adapter. I can't seem to find available module to load, either. Would be great to be able to use it for m…
-
This may be a bit long winded.. but here goes.
I got a hermit crab V2 canbus from BTT a few weeks back. Flashed it with Katapult and then klipper and all was good from a firmware point of view. I h…
-
### Describe the feature or hardware support you'd like
We need to get support for the BTT MMB v1.1 i spent 2 days trying to get the gear stepper to work only to realize they changed the pins between…
-
### The problem
Hello,
esphome on 1st gen dual core ESP 32 (board: esp32dev)
component mcp2515 is not receiving any can messages with extended id.
Transmitted can messages with extended id a…
-
Not really an issue, but how do you wire the CANbus ground connection on the board? Thanks