-
I tried `M42 P6 S255` which worked on the stock CR6 Motherboard, then I tried `M355 P255 S1`, also `M42 P4`, `P5` etc.
Nothing switches on the nozzle LED, which is blinking when flashing the firmwar…
-
Hello my display has T5L1 DGUS2 v4.3 2021.10.21. and by mistake I flashed with the T5L_UI_DGUS2_V45_20220105............. now what to do? the screen is black nothing even try to flashing with the 3.5 …
-
### Cura Version
5.6.0
### Operating System
Windows 11
### Printer
Creality CR6 SE
### Name abnormal settings
_No response_
### Describe model location
_No response_
### Describe your model
…
-
### Checks
- [X] I have searched the bug with a few keywords, and I confirm this bug was not yet reported.
### Location
Horizon
### Describe the issue
![image](https://github.com/Aurorastation/Au…
-
### What happened?
Select an object, "Add settings -> Perimeters Shell", there is no option to adjust "enforce_full_fill_volume".
### Project file & How to reproduce
Select an object, "Add settings…
-
Hello
I wanted to install the Bigtreetech Filament Rolout Sensor, I changed and compiled the firmware according to the instructions. I have replaced the sensor with the original, I can also call up t…
-
### What happened?
When using "Add settings" for an object, there are only 4 options available. Consider adding more options. My primary use case is for testing only, so consider it low priority (if …
-
**Describe the bug**
With the Ubuntu implementation the text in the "Add physical printer" scree is invisible or just not there. I as an experienced user from PursaSlicer and using OrcaSlicer on Wind…
-
cr3
-
### What happened?
Sliced object, found an unnecessary "Internal bridge infill" layer/section. When printed, it was causing excessive over extrusion.
The layer below is solid infill, so there shou…