-
Hello,
I have an Ender 3 with an SKR Mini E3 V3, and I just bought the Micro Probe V2. I tried both firmware files from the firmware tab, but neither worked.
First, I tried the normal wiring wit…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Come up om the screen probe out of bounds after the left front 1st probe.
### Bug Timeline
2 d…
-
An issue I have encountered is that the new "neo" update to ender series uses different extrusions with 1 side flat.
It is still fine in my opinion since support is held with 2 screws and motor moun…
-
hi Jyers, i have an ender3 v2 with V4.2.3main board,ican't find any firmware.
and i find the different between 4.2.2and4.2.3 from marlin documents
/**
* CREALITY v4.2.3 (STM32F103RE / STM32F103…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The G29 command for bed leveling won't work in release 2.1.2.2, 2.1.2.3 and 2.1.2.4.
My setu…
-
If I put the bin file of 2.06.01 version, it works fine, but I can't modify the firmware and if I put the latest version posted here, the z-axis motor is stuck.
Is there a solution?
joo-3 updated
1 month ago
-
When I installed the camera everything went well up to a point. After that, the service did not work for me and the camera did not start. Can I manually create this service?
```
Camera was only dete…
-
### Cura Version
5.8.0
### Operating System
windows 11
### Printer
zonestar z9 with M4 Hotend
### Name abnormal settings
echec decoupe
### Describe model location
_No response_
### Describe …
-
So ive upgraded to the BTT E3 v1.1 board.
Installee latest reprap firmware, set up the wdc interface and got everything up and running.
everything works just fine except for homing, my x and y axi…
-
https://www.findhao.net/life/2596.html
Creality ender3 v2 3D打印机官方安装视频。 https://www.cxsw3d.com/ender3v2/153-4204.html 官方给的tf卡里有pdf版本的说明书,对照着视频和文档安装即可。调平非常重要,我花了三个小时来做平台调平。 因为本身有个jetson nano,所以没有买树莓派…