-
## ESP32 S3 with camera OV5640
//WROVER-KIT PIN Map
#define CAM_PIN_PWDN -1 //power down is not used
#define CAM_PIN_RESET -1 //software reset will be performed
#define CAM_PIN_XCLK 15…
-
Is it possible to make the encryption optional on the GS to be able to receive the unencrypted video feed from https://github.com/RomanLut/hx-esp32-cam-fpv ?
-
Raspberry Pi camera module takes snapshots every 5 seconds and sends to Prusa Connect API. Maybe reuse something from the https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam for better functionality.
-
hello, I have used code for object detection using the FOMO (edgeimpulse) method. Can you help me to combine it with the code to periodically save photos from the esp32cam to the micro SD every 10 min…
-
ESP32 CAM introducción y primeros pasos
https://programarfacil.com/esp32/esp32-cam/
Using the ESP32-CAM MicroSD Card
https://dronebotworkshop.com/esp32-cam-microsd/
[ESP32-CAM esp_core_dump_fl…
-
I'm not sure if this is purely a problem with Prusa-Firmware-ESP32-Cam or not. The digging I've been able to do seems to indicate that the unit I have only works properly when connected to a USB seria…
-
Hello and congratulations for this wonderful job.
I wanted, if possible, to ask you some questions about it.
Is the product you find the link suitable for this project?
https://www.amazon.it/diym…
-
All the instructions say to click the "Connect" button on https://jameszah.github.io/ESP32-CAM-VideoCam but it looks like that button no longer exists. After some digging, it looks like the button was…
-
-
Dear fa1ke5,
Thanks for your great code. I succeeded to make it works with the ESP32-CAM but with a small (and ugly modification) because it failed without it.
I easily succeeded to connect to t…