-
I'm running the BTT smart Sensor v2 on a Voron 2.4 with klipper. When I print things seem to work correctly until some point where the switch sensor gets triggered. When I heat the hotend and extrude,…
-
If it makes sense, enter what type of printer or upgrade the feature request applies to.
**Printer type** - [Prusa XL ]
**Optional upgrades** - [e.g. Filament Runout Sensor]
**Is your feature req…
-
Noticed a likely oversight today while I was out of my house - the touch screen will report a jam and pause the printer, but there's no output to fluidd (not even a console note) as to why the printer…
-
Whenever I pause a print to change filament or trip the filament runout sensor the printer fails to resume printing (extruding filament) upon resume. The print head goes back to the last spot before p…
-
Is there a way to connect two SFS filament run out sensors to the board?
-
I don't know why, but sometimes the unload fails and I'm sure the synced unload not works if it fails.
It tries to unload to the buffer but the filament is still inside the extruder (toolhead sensor …
-
**Printer type** - MK4
**Printer firmware version** - 5.12
**Original or Custom firmware** - Original
**Optional upgrades** - none
**USB drive or USB/Octoprint**
USB Drive
**Describe the…
-
Hello
I have an issue with the filament run out.
I am using E3V2-2.0.x.17-Fast-5x5-180321 version
cable checked metered etc.
The issue is that it cleans nozzle
Then goes to print and the ru…
-
### Did you test the latest `bugfix-2.1.x` code?
No, but I will test it now!
### Bug Description
When FILAMENT_RUNOUT_DISTANCE_MM is defined and a new print is started without filament Marlin…
-
Greetings,
I upgraded the firmware on my Neptune 3 Pro from 1.1.5.1a to 1.1.5.1c (the "latest" Release) including the appropriate screen firmware.
Flashing worked well, I recalibrated everything a…