-
How can NOS3 run with Hardware in the loop?
This may involve the HWLIB. Here is a diagram from [Matt Grubb's Thesis](https://researchrepository.wvu.edu/cgi/viewcontent.cgi?article=9091&context=etd)…
-
It would be very helpful if a .WAV file of sample MinXSS-2 packets could be provided so that we could verify the proper function of the new decoder.
Thanks!
-Scott, K4KDR
K4KDR updated
5 years ago
-
The OBDH2 cannot communicate with the EPS2.
-
The Avionics Board occasionally enters a boot loop.
Measurements of the power during this cycle show instability (very roughly from 1.5v to 3.3v)
Avionics log shows the event occurs after the MP…
-
* Implement the COM `init_radio` function to use the radio peripheral (without BLE mode)
* When selecting a radio configuration, favor parameters that support low (slow) bitrates and longer-distance …
-
It should always be executed from here:
https://github.com/georgeslabreche/opssat-onboard-image-denoiser/blob/main/results/calculate_metrics.py
Implement this FIXME:
https://github.com/georgeslab…
-
The random MAC address doesn't really work for our FlatSat setup.
Need to use the MAC addresses from EEPROM or use a static MAC address for each type of card (all C3 images would have the same MAC …
-
# Monopole and Helical Antenna Deployer Testing
We can't tell if the resistor is shorted out, but we can tell if it's open. It would be nice to be able to run a test via the REST API via a button a…
-
Currenty we need to compile on a laptop, move the binary to a USB stick, plug it into the raspi, copy it, change permissions and then run it.
This is not nice. Find out how to make it nicer.
-
For automatic testing, the logic analyzer (digilent analog discovery 2) needs to be controlled by some kind of script.
Find out how to do that and what the limitations are