-
Hi, I'm not sure if this could be related to the GliGli Teensy upgrade, but lately my TUNE and ARP Up-Down buttons no longer work. HOWEVER, sometimes they do and I don't understand this. It's prolly n…
-
hi gligli,
thank's for your great work !
it's a pleasure to use all the new parameters !!
i just finished an ipad editor (with mididesigner) for the p600.
my questions:
- are there midi cc's for the 2…
-
I did the upgrade a few months ago and it has been great. My arpeggiator was working just fine up until a few days ago when it just completely stopped. I turn it on and I get no sound from any keys,…
-
Prophet 600 runs well with z80 installed. With teensy++ 2.0 and gligli v2.0 or v2.1 installed I get osc a when mixer pot is turned to osc b and I get osc b when pot turned to a or b, in preset mode an…
-
Hi,
Been a happy user of my p600 with gligli 2.00. Since a few months, I have a weird problem when tuning.
After hit tune, its starts normally (A1, A2,...) then when it hits A5, weird things happe…
-
Hi Fabrice and forum,
This is most likely more of a hardware problem, but I'm just checking from the software point of view here.
My p600 is experiencing abrupt voltages drops to zero around the…
-
Is it possible to 'relocate' the position of the 'Modulation wheel target' bits (incl. padding)? It would be better if it would come right after 'Modulation wheel range' and before 'Osc pitch mode'. T…
-
My blog posts should help for this: http://gliglisynth.blogspot.fr/search/label/p600fw
-
Hi folks, as the teensy board (https://www.pjrc.com/store/teensypp_pins.html) is out of stock I just ordered one on ebay where I had to solder the pins by myself onto the board. After I had done this …
-
Hi and thank you so much for your work on the upgrade!!!
I just upgraded to the okt26 version and found some issues.
Issue 1
First there was no sound, than I pressed FromTape->5 and than only one vo…