-
### Version
2.1.5
### Hardware / Firmware
GRBL 1.1
### What happened
Jogging mode gets stuck when operating a joystick as an input device (xbox 360 gamepad), more precisely when input source is "…
-
Hi.
I made some tests with BlackPill (411, firmware from Web Builder) connected to two generators, one 3200 Hz as pulses, and second 1 Hz short pulses as index.
I surprised the G33 (and G76 too) wo…
-
Hello,
I have a data transfer problem when I mill a file from the TFT display's SD card.
When I mill with this file from USB everything is OK.
grbl 1.1h
MKS TFT24 display
Firmware MKS-TFT24_C…
-
I downloaded the last version of the firmware from here
https://github.com/makerbase-mks/MKS-DLC32-FIRMWARE
compiled it with platformio and uploaded the bin file to the mks dlc32 v2.1 board thro…
-
I am using nucelo-f401re, want to install grbl firmware in it. how can I modify these resources to do so.
-
I've tidied up the machine - all the wires are now enclosed in corrugated tubing. It's looking much prettier now!
![image](https://github.com/temporalecologylab/TreeRings/assets/62484502/6989938f-…
-
Hello. I made this code work. But it's been twice that I have a mistake. It loses the connection due to one error or another. And when it loses the connection the laser stays on. Which pierced my 12mm…
-
I'm modifying a laser machine, which didn't use grbl firmware, used proprietary software along with proprietary company firmware. I recorded the GRBL on it, but when testing with the LASER GRBL when I…
-
I have just started to use GRBL panel, and it seems to me now that this is the real standard for GRBL sender, G-code interpreter.
I just miss a feature related to macros: The possibility to have a …
-
The process stops after the following errors in the terminal. I use grbl 0.9 (the cnc works fine with the grbl sender "Rabbit Mill")
`Recv: error: Expected command letter`
`Recv: error: Invalid …