-
Currently it is only possible to change the infill density. It would be nice to be able to have infill at 5% density but have a thickness of 2 lines or more. For example gyroid with 2 lines at 5%.
Th…
hutje updated
2 months ago
-
### Cura Version
5.8.0 (Tested), seems on 5.X.X
### Operating System
Windows 10
### Printer
Voron 2.4 / Troodon2
### Reproduction steps
1. Load thin modell e.g. 3mm thickness (wall) into Cura
…
-
**Infill line multiplier**
As described in this issue on BambuStudio Github: [https://github.com/bambulab/BambuStudio/issues/1528#issuecomment-1640671376](https://github.com/bambulab/BambuStudio/is…
-
### Application Version
5.2.1
### Platform
Windows 11
### Printer
Ender 3 Max
### Reproduction steps
I accidenteley set my infill density to 1% and the pattern as Gyroid and when …
-
### Version
Version 2.0.0+win64
### Operating system type + version
Windows 10
### 3D printer brand / version + firmware version (if known)
Prusa i3 MK3s with MMU 2.0, running marlin firmwar…
-
### Version
PrusaSlicer 2.0.0-rc2
### Operating system type + version
windows 10
### 3D printer brand / version + firmware version (if known)
MK3
#### feature request
as the gyroid infill a…
-
1st trial
Basic PLA 200/50°C - 60mm/sec 15% infill density
2. Change in…
-
Hello,
I tried to slice a STEP surface (gyroid) using that way:
STEPToXSection.exe -i %stepFile% -o GyroSeul.ply -f xyz -d 0.01 -p 1.0,0.0,0.0,0
but the output ply file is empty.
![image](http…