-
Added:
1) Group: Application/Engineering
2) %doc readme.md CHANGELOG docs/OpenHantek6022_User_Manual.pdf **_docs/HANTEK6022_AC_Modification.pdf_**
[openhantek.zip](https://github.com/OpenHantek/O…
-
**Describe the bug**
The software can not connect the scope in a normal way. If I start the software first then plug the scope in after 5 sec, I can select the scope in the drop-down and enter the so…
-
You can add a link to the manual (with hardware AC modifications howto) near AC activation checkbox option.
https://github.com/OpenHantek/OpenHantek6022/blob/master/docs/HANTEK6022_AC_Modification.pd…
-
Hi guys.
Recently I got my hands on a clone of USBee-DX device. This is combined logic analyzer and oscilloscope.
I was hoping to make it working under Linux with Sigrok PulseView software, but unfo…
-
Would patches for other devices be accepted?
https://sigrok.org/wiki/Noname_LHT00SU1
https://sigrok.org/wiki/HT_USBee-AxPro
They have sigrok firmware but no gain stage and only one channel.
-
Is ist possible to enable the ac/dc coupling without rebuilding the binaries. ex. by an option?
-
Thanks for all your work on this software!
For my application, it would be really helpful to have time bases longer than 100 ms. From looking at videos of people using the Hantek Windows software, …
-
Hello,
I have a Hantek handheld oscilloscope.
It is a very good 70MHz scope but I would like to have a better PC software for it.
Hantek doesn't provide any SDK for this model, All the DLLs tha…
-
Hi Ho-Ro,
please see attached screenshot. Setting the sampling to anything (allowed) below 30MS/s yields
the calibration signal base (lowest peak value) displayed exactly at the CH1 level, i.e. -5…
-
Just wondering if you may have an idea how to get this software to support 10bit mode on the 6022. I see that the Hscope Android app can put the 6022 into a 10bit mode. It would be particularly nice…