-
程序编译下载完后的串口信息为
```c
22:38:59.682 -> D (88) ESP_Panel: Begin IO expander
22:38:59.682 -> D (92) ESP_Panel: Begin LCD
22:38:59.682 -> D (94) ESP_PanelBus_SPI: Create panel io @0x3fcecc70
22:38:59.6…
-
Hello, I have a Roly LaserMatic 10 laser machine that has this control board.
I contacted the seller of the machine and he tells me that the plate is made by you. My intention is to use the I2C outpu…
-
I want to communicate with the Open Bootloader using the I2C interface, so from the host side, I executed i2cset -y 6 33 33 to the MCU, with the goal of making it jump to the application. After execut…
-
Hello,
very nice project and thank you for sharing!
Did you already try indoor navigation using the IMU array and are do you expect 100 Hz to be enough for a e.g. vacuum cleaner rover?
I was wonder…
-
Create an I2C interface, equivalent to WPILib's I2C class, to deal with I2C buses.
-
One could design a custom power module for DIOT with the following features:
* 220mm depth, 8HP/10HP wide (maybe 9HP, see below), ~offset green guide like EEM_PWR_MOD_AC~ 1HP offset red 220mm guide…
-
I don't think this is a case of bad corsair naming (at least I hope not) driver in lsusb is usbhid.
```
$ sudo liquidctl list --debug
[DEBUG] (cli) (main): version: liquidctl v1.8.1
[DEBUG] (cli…
-
The functionality of this library is nice. It would be great to implement support for the upstream `nxp-nci` driver (https://github.com/torvalds/linux/tree/master/drivers/nfc/nxp-nci) instead of http…
-
### Description
Product mcu : https://www.wch-ic.com/products/CH32V103.html
Features
Qingke V3A processor, max 80MHz system clock frequency.
Single-cycle multiplication and hardware division.
2…
-
Could you please tell me if it is necessary to supply power in addition to the I2C interface power? The power indicator lights up after only the I2C interface is connected.
![photo_2024-09-16_22-00…