-
# Affected Version: 3.7.x, 3.8.1.0
# Steps to reproduce / actual behaviour:
- Create flowgraph: Noise source, Throttle, IIR Filter, QT GUI Frequency Sink
- QT GUI Range: id=a1, default 0, steps -…
reald updated
3 months ago
-
# Content, accessibility, information architecture (CAIA) new initiative collaboration request
Use this ticket to request collaboration on a new initiative with the sitewide content, accessibility,…
-
It appears running Xcelium on the SHA256 (on CPU 1) and IIR (on CPU 2) for the bareMetal test macroMix are failing (timing out) on CEP v4.5. Is this expected and is it fixed or still an issue on CEP …
-
- [ ] currently, after each select, the entire filter is recomputed about 7 times (too many calls to _setup), which slows down the code.
- [ ] need to allow for tiny changes with short keyboard keyst…
-
Create a new IIR filter facility in a `dplug:iir` module, splitted in two.
- [ ] Pole-Zero realization should be separated from computation of those Pole and Zero placement.
- [ ] Smoothing should b…
p0nce updated
2 years ago
-
- [x] IIR filtering
- [ ] ADC/SDcard rtos semaphore based
- [ ] UDP and plotly
-
Um working with Superpowered SDK in android , but IIR filter in it is of specific degree
so can use your library in this to increase the degree of the filter , for example >> iirfilter_lowPass(300 Hz…
-
Hi there,
I see the implementation require high knowledge of C++ coding. I have been through the example of the Butterworth filter, and I am keen on getting the b and a coefficients to compare with …
-
Hello Christian,
thank you for sharing this project. I am currently testing IIRNet with some magnitude responses I have and trying to compare the results with an optimisation based approach. Unfor…
-
Do you have an example schematic or otherwise of how you have your arduino wired to your XTB-IIR. I am trying to accomplish exactly what you did with your code, and I am getting some results out of t…