-
Hi diggerbonk!
I'd love to see a photo of your Smokey and the bandit Uzebox JAMMA arcade machine. IMO you should add a photo of it to this repo and add it to the end of the README.
If you don't …
-
Let's face it. It's getting to the point where hardwiring a ps2 controller to the JVS (or sub board) logic won't cut it. Aside from the fact the ps2 controller ports are rarely used with s2x6, a dedic…
-
We are extracting the schematics for the SEGA System 18 PCB. We've found that the way signals go to the JAMMA connector seem to have RED and GREEN swapped with respect to the schematic you made below.…
-
Hi,
I have an arcade cabinet modified with a crt tv. I have connected the rgb pi cable and sound and image displays ok. The problem is when I try to configure controls. I have a Ultimarc JPAC conne…
-
I was testing my Neogeo MV-1FS with my GBS board on the most current release and the screen is filled with zigzagging garbage, occasionally showing a somewhat correct looking freeze-frame, then return…
-
```
What steps will reproduce the problem?
1. Boot GroovyArcade
2. When gamelist is up, launch a game
3. Up and Left usb joystick (1) inputs/buttons do not work
What is the expected output? What do y…
-
After the HLE (high-level emulation) driver reaches a satisfying quality, it would be really cool to port the VM to run on a Z80 (or some other CPU - maybe we would need something more powerful such a…
-
Is the mapping shown in the readme still valid? I've tried multiple keyboards but I'm getting no response from the keys shown.
-- Keyboard inputs :
--
-- F2 : Coin + Start 2 players
--…
-
```
What steps will reproduce the problem?
1. Boot GroovyArcade
2. When gamelist is up, launch a game
3. Up and Left usb joystick (1) inputs/buttons do not work
What is the expected output? What do y…
-
I own an RGB-PI JAMMA, and run it on a Nanao MS9-29 (Sega AstroCity monitor)
![image](https://user-images.githubusercontent.com/45140115/125539717-4c9b23d3-75b2-4cfc-9b43-f22c759c2782.png)
Probl…