-
Noticed that the VRX200 temperature cannot be read by the collectd package as the temperature is not at the "standard" location in the sys fs.
After a bit of exploring I concluded that a simple patch…
-
Hey,
I want to use the FXS plug of the Easybox as outlined [here](https://openwrt.org/docs/guide-user/services/voip/asterisk/chan-lantiq).
However, recommended installation via `opkg` fails with:
…
-
Hi,
Does anyone know how to set pmg3000 in no vlan or bridge mode ?
Currently the sfp works ( onu ploamsg state is 5) but the upload speed is around 3Mbps.
In opt/lantiq/bin/config/ I have the …
-
I was able to get go-dsl working with my ALLNET ALL-BM300 modem after applying some quirks. I don't have a straight up patch because some of the quirks go beyond what go-dsl does right now, and others…
plush updated
8 months ago
-
does anyone have a firmware with the original lantiq omcid enabled.
-
problem resolved by adding flag -lz in MakeFile on EXTRALIBS=$(XTRALIBS) -ldl -lm -rdynamic -ldl -lz
Regards,
Goran.
-
Hello! The `gtop` command to see a debug menu is missing in the docs:
To access th…
-
There are multiple branches merged with master at various times, with various levels of Lantiq devices merged and different openwrtX version tags. Which one should be used to build latest stable relea…
-
I cannot use the sipeed-rv-debugger to debug my MaixDock.
It outputs the following in the debug console:
```
_ __ _ _
| |/ /___ _ __ __| |_ __ _ _| |_ ___
| …
-
*everloop2:*
Device problem occurs on: [[https://openwrt.org/toh/astoria/arv752dpw22|ARV752DPW22 (EasyBox803a)]] tested.
Software versions of OpenWrt/LEDE release: since kernel 4.19 (OpenWrt trunk…