-
Dear teacher
In the actual experiments,the laser always has its frequency bandwidth.Whether can the EPOCH set the frequency bandwidth of laser.If it is,how to set it in the laser block.For instan…
-
As far as I understand, the distance captured by the LaserRangeFinder (within LaserMeasureInformation) represents the distance to the ground at the centre of gravity of the screen. By default, the tar…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
_No response_
### Describe the feature you want
*
### Additional contex…
-
Hi,
I'm new to WarpX and I did read some of the compilation related issues but I'm not sure if I understood my problems. I could compile the WarpX successfully on two machines using the similar ste…
-
Spindle minimum stop time 1 sec. and I have a laser.
the laser from figure to figure does not have time to turn off the laser. burns remain.
Minimum shutdown time in spindle settings is 1 sec. canno…
-
### Describe the bug?
When in desktop mode, turning off VSync will reveal that as the framerate goes higher, the scrollwheel speed decreases. This is especially problematic when working in a world by…
-
### Short Description of the issue:
"Beam" weapon shoots beams. Good.
"Laser" weapon shoots energy projectiles. When someone says "Laser" I think about beams.
### Solution:
"Laser" weapon …
-
### What's the feature?
Allow a laser (e.g., via a toggle) to not decay while a user moves a drawing device on the screen without lifting it.
### Contact Details
_No response_
### Code of Conduct
…
deemp updated
13 hours ago
-
Add lasers to shoot approaching targets.
DebRC updated
1 month ago
-
![WhatsApp Image 2024-04-26 at 11 42 46 PM](https://github.com/visha20213044/LaserCamTracker/assets/97392436/d6792eba-d9f8-4b6c-ba9b-31133ccfaed5)
https://github.com/visha20213044/LaserCamTracker/a…