-
Hi Everybody,
I'm Nathan, an automatician and I'm here to get help on a problem with a custom laser engraver.
I built a laser engraver to make customized 3 by 3 round stainless steel water bott…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I was trying to add a physical button emergency stop button to a laser machine. I didn't wa…
-
We needed to make this https://github.com/MakerSpaceLeiden/commons-net/commit/5c3b9228135e07fe366afbdf5bde73982ad16eaf change in commons.net to keep visicut working with our LAOS laser cutters (https:…
dirkx updated
8 months ago
-
i have the Comgrow Z1 laser engraver. it comes with an ESP 01 chip already installed as seen here.
![image](https://user-images.githubusercontent.com/37672036/201090850-2d86613d-0e2e-46e3-9634-ff2c07…
-
I would like to use GRBL with a laser engraver. I would use the spindle speed control to adjust the laser intensity for engraving pictures.
-
Evening. I have recently purchased a two trees TT-55 laser engraver. Board says its an MKS LTS V1.1.
Firmware seems to be dead and the supplied USB stick didnt have any firmware included.
Two tree…
-
Like these, but perhaps powder coat in red, with silk screen or engraved labels, and use ebonized ash for the sides. This should be fairly cheap, if we use one of the online CNC sheet metal houses (e…
-
I'm working with the Sonic Pad so that i can use the Creality Ender-3 S1 CV-Laser Module.
So far i have managed to configure printer,cfg so that i can make macros to support the laser.
I got two…
-
Hello Nikolay
Have a PCA9685 16ch 12bit PWM controlled by I2C bus. I'm using it to control
a laser cutter/engraver with higher PWM resolution. Is it possible to sync DMA motion
with I2C messages, a…
-
Hello, is any chance have WEB UI for classic milling machine, not laser? I have changed firmware for CNC but WEB UI is still for laser engraver. Thank for response :)