-
### The problem
bsec not working on the single core esp32 version
there should be fixable from what i found:
https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/Linking-BSEC-library-to-ES…
-
**Describe the problem you have/What new integration you would like**
is it possible to add support for this sensor via BSEC using ESP-IDF?
well thank you
```
bme680_bsec:
esp32:
board…
-
The Block for the sensor BME680 always returns 0 for the "Calibration Value"; together with this the values for IAQ, eVOC and eCO2 remain unchanged, although the sensor should show individual readings…
-
Hello,
very nice project and thank you for sharing!
Did you already try indoor navigation using the IMU array and are do you expect 100 Hz to be enough for a e.g. vacuum cleaner rover?
I was wonder…
-
Can someone explain the available modes?
I can see in the examples and in the library the 3 modes:
BME68X_FORCED_MODE
BME68X_SEQUENTIAL_MODE
BME68X_PARALLEL_MODE
Nowhere those 3 modes are exp…
-
I have implemented the drivers for the Melexis IR sensor MLX90614:
https://github.com/OpenAgriTech/LoRa_STM32/tree/MLX90614
At the moment, if detected, it is reported instead of the SHT Air Temp…
-
Must first be implemented in firmware, is only complete after implementation on gateway side
-
![USFSMAX_Plot](https://user-images.githubusercontent.com/6698410/101543986-d4344500-3959-11eb-9703-184a77ea6839.jpg)
-
As a newcomer to this great sensor and python, I am getting good data using bno055_simpletest.py. It would be very useful if we had the option to save the self-calibration data for re-use at start-up,…
RicDG updated
2 years ago
-