-
When i try to upload a tft file while using the esphome variant, i always get only to returned [].
i need to flash with tasmota using "FlashNextionAdv6 http://localhttpserver/tft/nspanel-v4.1.1.tft…
-
I would like to add support for Nextion touch HMI displays. I am using them for route panels and turnout control. It great simplifies my wiring.
What is the best way for me to add this to DCC-EX? I…
-
### The problem
I found that if the Nextion is powered at the same time as the esp it is not detected. If you turn off only the Nextion and then turn it on again, the esp reads it... But only at 96…
-
Hi @terjeio , would it be possible to add plugin for Nextion displays ? [https://nextion.tech](https://nextion.tech)
I mean something like when you press a button it sends a Gcode command to serial.p…
-
I was trying to use the latest version of the software and was bitten by an interesting problem.
I use a Nextion display. This uses the second uart port on the ESP32 chip. It turns out that the PC b…
-
Hi, is there a wiring howto?
i am having trouble getting my nextion (3.5inch but thats another story) connected.
Which ports on RAMPS board?
-
I succeeded to use your program with my Wemos mini d1. Works great!
Now I want to use a Nextion display as a user interface, allowing touch control. Whatever I try, the Nextion will not react..
if I…
-
Hello Jonathan
I test longer time with help from Winters with NEXTION Display connected on BI7JTA V3F4 board with Winters MMDVM firmware (G4GLX).
Today i test your latest MMDVM compiled with enabl…
DL9AM updated
2 months ago
-
Hey, firstly thanks for the video, really helped with getting this thing flashed with ESPHome.
During this process however, I found an issue with the demo TFT files. In Nextion you need to set the b…
-
Hi Jevgeni Kiski,
I have installed the package using 'pip3 install nextion' as described in the https://pypi.org/project/nextion/ page.
I am getting the following error during the upgrade.
Can …