-
Hi @elupus
Recently I have been playing around with ESP and RS485 (MAX485). After a lot of researching I got it working well, but it might be useful for other users to mention:
- If you want to…
-
Hi, I'm using the NIBE Integration in HomeAssistant. Was wondering why there are no units for the airflow sensors. Couldn't use it for automations and it didn't show a graph.
After a little resear…
-
This document contains registers and mappings for S-series pumps and looks to be in better shape compared to what get exported from the pumps:
https://www.nibe.eu/download/18.3db69dc1795e0d992c5722/1…
-
Hi, first off thanks for your hard work and very nice integration to myUplink!
I have a F1255-16 with the upgraded firmware to be compatible with myUplink instead of Nibe Uplink.
Everything look…
-
I have done al you say. Make a app with client identifier, a secret also, then I most generated my access code, what was a little bit different as you scribed. But whit the help of the nibe dev site e…
-
The fan speed in myUplink does not show the actual speed in percent (%), as NIBE Uplink does. It only shows the mode (0, 1, 2, 3, 4) where 0 = normal.
The integration shows it in %, so it will only…
mapaq updated
4 months ago
-
Is it possible to use the current coding to connect to Nibes new application used called myUplink?
-
Hi there.
Looks like i lost contact with my system during the night, has there been done some changes in the app?
Best Regards
Endre Langholm
-
I'm using the recommended Kingston SD card, but when I try to write the img file to the card, Etcher says "Insufficient space, additional 75.5 Mb required".
-
Hi,
Looking to maybe connect my F750 with nibepi, I'm interested in power/energy consumption.
Does this integration provides current energy consumption in kW and total energy consumption in kWh, i…