-
My onion device info:
```
Onion Omega2+
Device Info
580 MHz Ralink MT-7688 MIPS
Processor
128MB 580MHz DDR2
Memory
32 MB Flash Memory
Storage
```
I cannot connect to network https:/…
-
I can't install numpy module in my omega2+. I already extended my memory space using sd card using this instruction (https://docs.onion.io/omega2-docs/boot-from-external-storage.html)
I use pip3 wh…
-
Hi,
I still have an Omega 1 here, and I'm looking into buying an Omega 2 soon. I'd like to contribute some efforts from my side, and it would be nice if they and others could be featured / referenc…
-
Options: Settings->Wi-Fi Access Point Setup->Enable AP Mode
Don't Work - Cant disable "AP mode".
Please help - how to disable AP.
When i Unchecked "Enable AP Mode" - wifi AP still working!
I don't…
-
Attempting to use oupgrade but running into problems. Help? Here is a snipping of the error message.
![image](https://cloud.githubusercontent.com/assets/27601350/25068484/73dc5846-221a-11e7-87c2-…
-
Documenation says to transfer files using the editor "upload" feature.
https://docs.onion.io/omega2-docs/transferring-files.html
Well - that feature does NOT work..
You select the file and when…
ghost updated
6 years ago
-
Hi,
Trying to build this project: https://docs.onion.io/omega2-project-book-vol1/weather-station.html
And have issue at the very beginning when run:
root@Omega-0F7B:~/iot-weather-station# sh insta…
-
https://docs.onion.io/omega2-docs/c-compiler-on-omega.html says that if two lines are uncommented in the file `/etc/opkg/distfeeds.conf` you can add some package repositories for you to be able to com…
-
In my case I wasn't able to install the console on omega2 as the disk space was used by python.
Some of the things that I discovered myself but would be nice to have in the docs:
- To install th…
-
After flashing the `sysupgrade` does not start. After power-on, the led is lit for 10 seconds, then 25 seconds flickers and goes out.
The process of updating the firmware, perform the following com…