-
I have checked closed issue related with this issue.
https://github.com/ROBOTIS-GIT/OpenCR/issues/310
But I can't solve this issue with above guidline.
I am using Ardunino IDE 2.2.1, and insta…
-
When you try to install release 1.5.3 on Arduino by doing:
1. Go to Preferences --> add URL
https://raw.githubusercontent.com/ROBOTIS-GIT/OpenCR/master/arduino/opencr_release/package_opencr_index…
-
It'd be awesome to be able to work on OpenCR robotics projects with PlatformIO instead of the Arduino IDE. OpenCR is an awesome project: it has a wide variety of inputs and outputs, Arduino UNO compat…
-
I want to use Nvidia JetSon Tx2 as the SBC on Turtlebot3 ,but this Binaries only have "opencr_ld_shell_x86" for x86_64 and "opencr_ld_shell_arm" for 32-bit arm,but tx2 is 64-bit arm ,so i want to if …
-
I want to use wifi on the OpenCR board to get the server time, is it possible?
-
There seems to be no equivalent for the turtlebot3+openmanipulator ROS1 code (https://github.com/ROBOTIS-GIT/OpenCR/tree/master/arduino/opencr_arduino/opencr/libraries/turtlebot3/examples/turtlebot3_w…
-
I’m not very experienced but I’m desperate to get the turtlebot3_manipulation working see one of the reported issues:
https://github.com/ROBOTIS-GIT/turtlebot3_manipulation/issues/55.
Being despe…
-
On the same bandwagon with the issue on OpenCM github, https://github.com/ROBOTIS-GIT/OpenCM9.04/issues/89
It will be so nice and helpful for us if the OpenCR Arduino IDE has the ARM64 support enable…
-
Hello,
I got an error during uploading my firmware on OpenCR 1.0 board.
The error message is shown in the following screenshot.
![capture](https://user-images.githubusercontent.com/14089309/17…
-
I am trying to get rid of the low voltage warning buzzer. I realized that the odometry doesn't work after this.
I followed these instructions to find where I need to deactivate the alarm:
https:…