-
### The problem
Hi,
There are several integration problems with hikumo (hitachi overkiz box AHP-SMB-01).
My hardware is a "Triple C RAM-90NP5E" (with 1 water-heater Yutampo (with ATW-HCD-01 mod…
-
### The problem
**Action**: trigger an IO device (blind) connected through Overkiz (Tahoma Box)
**What happens**: An error message pops-up / the device is triggered / its state on the dashboard do…
-
### The problem
I have the following issues after adding my Hitachi heatpump to the Tahoma app:
* water boiler appears in the integration as unavailable
* circuit 1 & 2 of the heat pump don't appea…
-
### The problem
I have a garage door controlled by a somfy keygo io.
I always open the garage door with Home Assistant. When I do that, the status of the door changes to "open" in Home Assistant aft…
-
### The problem
Hello,
Atlantic Cozytouch data are not refreshed automatically,
I have to go to Integration / Overkiz / reload to get fresh data.
![image](https://github.com/home-assistant/co…
-
### The problem
If I'm not mistaken, this was previously also the case for https://github.com/home-assistant/core/issues/25240 / https://github.com/home-assistant/core/pull/26840.
The component …
-
### The problem
I am using the Overkiz integration with a Tahoma Switch box.
My Somfy shutter shows a "My Position" configuration entity with a slider. That slider shows 85.
When activating My …
-
### The problem
Add a switch to enable/disable child lock and open window detection.
Will require changes to how switches work in Overkiz, since currently the ValveHeatingTemperatureInterface is a…
-
Hello,
Im searching for a way to set positioning of my dumb RTS shutters.
Overkiz + tahomav2 + rts shutter:
RTS Shutter have 4 buttons in HA: "open" / "stop" / "close" / "favorite position"
Do y…
-
I use your velux integration to control my Somfy RS100 io window covers. It works much more reliable than the Overkiz-integration I have tried before. Unfortunately, the option to change default speed…