-
can I change the portapack screen by another a big one
-
### Description of the feature you're suggesting.
i want a ble jammer for portapack h4M if it's not avaible
### Anything else?
_No response_
-
Hi, I noticed you added internal mic switch in commit https://github.com/jamesshao8/portapack-havoc-modified/commit/2759561b45c704911fadf76b4ad969a86653e428
I have Portapack H1. Where should I connec…
-
I am successfully working with qspectrumanalyzer and other tools for hackrf, but SigDigger was showing me nothing. After some investigation I found that it just drops GHZ digit, so when I am receiving…
-
Hello guys,
I was trying to spoof location on Samsung Android device using HackRF One + Portapack. I think I generated file correctly using manual on [https://github.com/eried/portapack-mayhem/wiki/G…
-
csi@csi-analyst:/opt$ kalibrate-hackrf/src/kal -s GSM900 -E 10000
kal: Scanning for GSM-900 base stations.
sticks here
---
On the Portapack -> put into HackRF mode so the SRD passes through. On t…
-
I enabled the speaker in software.
Its volume (together with mute or unmute) is controlled together with the headphone for the moment.
If anyone has a analog speaker can have a try.
The port is a …
-
### Short description
The objective is to verify for which TX gain settings the HackRF can transmit a sinusoidal signal with 0dbm of power. The two TX gain controls are RF (0 or 14) and IF (0 to 47…
-
### Description of the feature you're suggesting.
Is it possible to add decoding for the Vaisala Radiosondes. Particularly the RS92. Frequency at which these transmit is 1680ish. I’d like to see , te…
-
gato ~ # switch_to_portapack
Hold down the HackRF's DFU button (the button closest to the antenna jack)
then plug the HackRF into a USB port on your computer.
After the HackRF is plugged in, you may r…