-
### Printer model
- [ ] MK3S/+
- [ ] MK3
- [ ] MK2.5S
- [ ] MK2.5
### Describe the enhancement
Can G81 results be made accessible using Prusa Connect, rather than requiring a computer running Pront…
-
Bug Report
============
**Steps to Reproduce**
1. Start MC
2. Turn on printer
3. add printer in MC - Prusa Research i3 MK2
4. follow prompts to set up over USB - optional to do a manual set up a…
8perf updated
2 years ago
-
I ran into this issue a few times on multiple multi day prints. So far I've only had this happen with this object. The error wasn't generated until I updated my firmware on my Prusa I3 MK2. This er…
-
Hello,
Thank you for creating & sharing this! I generated a calibration gcode file for the Prusa MK3.5 and it appears to be incrementing the M900 K values. The default MK3.5 printer & PETG filame…
-
### What happened?
I have been using v2.4.58.5.
I used the program a week ago, and it worked just fine. Recently the program has been failing to launch. When I launch it, the program hangs and is un…
-
### Description of the bug
Printing this part in PETG using Arachne with default settings doesn't close the gaps marked.
Which setting will I have to edit to close them?
Using the classic perimeter…
-
### Application Version
5.3.0
### Platform
Windows 10
### Printer
Prusa i3 Mk2
### Reproduction steps
1. 3d model details: Vertical pipe with wall width 0.8mm. Nozzle 0.4mm.
2. Cura settings:
…
-
### Description of the bug
Issue #8728 has been reintroduced.
Every time I open the Gallery window, I keep having to resize/move it to what it was last time I opened it..... it's not saving the …
-
### Version
Version: 2.2.0
Build: PrusaSlicer-2.2.0+UNKNOWN
### Operating system type + version
Manjaro Linux 20.0.3
### 3D printer brand / version + firmware version (if known)
Prusa i3 Mk2…
-
The rambo-base.stl in the MK2.5 branch (and in the STL package from the prusa website) is marked "R1", while the downloadable gcodes are "R2". Might it be that the gcodes are made from a local branch …