-
### Describe problem solved by the proposed feature
PX4 does not support QSPI flash storage
### Describe your preferred solution
Support QSPI flash storage
### Describe possible alternativ…
-
Thank you for the great tutorial.
Could you tell me, how to relocate the boot firmware from the micro SD card to the Jetson module's integrated QSPI-NOR flash memory, without having to create a fre…
-
Hey,
thank you very much for the amazing library. Everything is working fine, but when I try to read data using the Fast Read QUAD SPI 4IO I only receive the first few bytes. I am using a W25Q64JV.…
-
Hi ,
I have used DSView to decode QSPI waveform but it's seems wrong.
Flash is MX25R6435F, my seeting are
CLK : 0
IO0 : 1
IO1 : 2
IO2 : 3
IO3 : 4
CS : 5 (active low)
CPOL = CPHA = 0
I make…
-
## Description
I am encountering an issue with the OSPI flash driver when using the MT25QL512ABB8ESF-0AAT flash device with an STM32H723ZG microcontroller and Zephyr RTOS version 3.7.0. The main pr…
-
### Related area
adding QSPI mode to the SPI driver
### Hardware specification
ESP32, ESP32C3
### Is your feature request related to a problem?
I could not find any implementation of QS…
0x0fe updated
4 months ago
-
Hi,
When IOT works for a very long period (60 day) and I launch a reboot with cmd **sudo reboot**.
IOT can't reboot, with software, I force to do an hard reset electrical.
`===================…
-
Hi,
I got a issue booting with QSPI.
I have ICICLE-KIT & VIDEO-KIT and both doesn't work.
Enabled CONFIG_SERVICE_QSPI & CONFIG_SERVICE_QSPI_MICRON_MQ25T.
But i got only this log
[6.157924] …
-
QSPI transfer error flag (TEF) is set while reading a certain block in `qspi_read_cmd_qaddr_qdata` this happens exactly when the host (in this case arch/Linux) mounts the storage. I tested a lot of th…
-
Hi,
For some reason it broke on the last ESP32 core, Do you know what the problem is? I am trying to use your library to send 3 parralel 8 bit flux by using the QSPI (after packing the datas in a spe…
0x0fe updated
9 months ago