-
Hello,
i found no comment about the internal resistors and how they are set with rpi.2
It shoult be possible to configure the Resistor to Pull up or down when i set an GPIO as Input
Please Doku…
-
Hello,
I found a problem in EngineeringPaper use, during electronic circuit calculation.
I am dimensioning a circuit and from the calculations I find "exact" values for two resistors.
Now I want t…
-
Is it possible to change resistors values to short number? For example 15kOhm instead of 15000Ohm.
-
Hi, not really an issue but I am in the UK and really strugging to get hold of a 04W 330K resistor, I can get hold of 300K 0.4W will this be Ok. Sorry for the noob question.
Brendan
-
The MTK modeling process seems to be as follows:
[@structural_parameters](https://docs.sciml.ai/ModelingToolkit/stable/basics/MTKModel_Connector/#Conditional-elements-of-the-system) determine the mo…
-
My daughter was learning about earthquakes and seismographs in school, which inspired me to build this with her.
I have never worked with a geophone before.
You mention a 395-ohm geophone resistor…
-
hi, i see 2 resistors, can i know the value of each of them? can I also know how you connected the 2 resistors? in stores I only find 4.7k ohm resistors. thank you
-
## Current Behaviour
It is not possible to add a digit to the current value of a resistor. This does not happen with the capacitor.
**Build:**
Fritzing 1.0.3
**Operating System:**
Windows 11
…
-
R11 and R14 got no Footprints, but the value of 20 ad 27, is this the right resistor value?
i try to build a PCB for PCBWay, but i saw those are not connected.
![image](https://github.com/michal…
-
If you calculate the DAC output impedance for the different input values, you will find that the value is close to R/3 except for `S[2:0]==3'b111`. If you add another resistor of value R before the th…